Control del consumo eléctrico CcM App
CcM App

It is an Android app to monitoring, which facilitates searches and configuration of the devices using a mobile phone with a possibility to save historical data, connect them to the local WiFi network, physically locate them and configure them.

 

The Energy CcM App for Android enables all the devices with a WiFi or internet connection to:

  • Read the real-time data in local mode (within the smartphone’s WiFi range) without creating a user (every 1 second).

  • Store the data in the internal memory (3 months) in case the connection with the server is lost.

  • Find configured CcM devices (within the local WiFi network), and those which have not been configured (AP Mode), within the smartphone’s WiFi range.

  • Create users to view historical data (every 10 seconds).

  • Set parameters/ configuration of the historical data (10s, 1 min., 15 min., 30 min., 1 h., 1 day)

  • Display graphs and historical data of the power, energy, and P.F. selecting specific dates, a date range or months.

  • Configure the WiFi connection mode (Cloud, FTP or Gateway).

  • Link the CcM device to the user router.

  • Hand the CcM device over to another user or nominate a supervisor (share the data with another user).

  • Geographically locate every CcM device.

  • Add photos and notes regarding the installation.

  • Configure an automatic/manual connection mode between the smartphone and the WiFi of the CcM device.

  • View the complete WEB catalogue of CcM devices.

  • A link from the App to the user’s WEB Module (Login)

  • Remote firmware update

  • Create or organize the devices into groups (distribution boards, buildings, etc.)

  • Configuration and reading of temperature probes or Pt100 inputs.

  • Configuration and reading of water and gas counters (Pulse inputs)

  • Configuration and reading of digital inputs and outputs.

  • Configuration and reading of high-current transformers up to 10,000 A.

  • Configure the counter device in unidirectional or bi-directional metering mode.

  • Change the current flow direction (Consumed or generated power).

  • Turn the contactors, relays, and reclosers on and off remotely.

  • Alert in case the Internet connection is lost.

  • Alert in case there are power phase shifts in all three phases.

  • Alert in case of overvoltage and low voltage in the grid.

  • Alert in case of complete voltage loss and recovery.

  • Consumption timer metering instantaneous power (maximum and minimum) and total consumed power.


Subject to a monthly fee:

  • Read the photovoltaic inverters in self-consumption PV system or other PLCs.

  • A breakdown or distortions of consumption of home appliances.

  • Report malfunctioning of home appliances.

  • Alert in case the network frequency is out of the set range (Hz)

  • Alert in case of reactive power (cos ϕ)

  • Alert in case of disruptions or anomalies in historical consumption patterns.

  • Alert in case power is below the value set in time.

  • Alert in case power is above the value set in time.

  • Alert in case energy is below the value set in time.

  • Alert in case energy is above the value set in time.

  • Alert regarding external conditions (temperature and pulse counter)

  • Alert regarding absolute totals (pulses and energy)

  • Alert regarding partials in time (pulses and energy)

  • Individual or group configuration of the alerts, hierarchies and friendly interface

  • Possibility to programme regulation measures in time when the relays, contactors, and reclosers are being turned on or off.

  • Pre-programmed regulations for sunset and sunrise (according to the geographical location and summer or winter time).

  • Possibility to programme actions on maximum or minimum values in time (temperature, energy, power, pulses).

  • Possibility to programme actions for external impulses (digital signals).

  • Possibility to programme actions for external information (RS-485 input-Energy and Power inverters or temperature probes).

  • Possibility to programme actions on maximum or minimum values in time (temperature, energy, power, pulses).

  • Possibility to programme actions for external impulses (digital signals).